Learn How To Unbrick Your Infinix Hot 2 X510 Here

Sponsored Advertisement
Own A Blog Like This
For Questions, Inquiries, Click Here
Page | Group - Follow us - Call us - Hire Us - info@entclass.com

Download Our Android App - HERE

Jan 11, 2016

Learn How To Unbrick Your Infinix Hot 2 X510 Here

Every android can get bricked, it all depend on how you use it. I will show you how you can unbrick your bricked infinix hot 2 (Android One) if it get brick or has already gotten bricked.


VCom Drivers - download it here

=> Infinix Hot 2 X510 stock rom - download it here
=> SP Flashtool - download it here

Steps Involved
==>Install VCOM driver - For Window 8 users see guide here
1. Extract the downloaded vcom driver.
2. Go to device manager>click action>click add legacy hardware
3. Under welcome to add new hardware click next
4. Select advanced option and click next
5. Select ‘show all devices’ and click next.
6. Click have disk
7. Browse to your vcom extracted folder and select the driver setup up file and click
open, then ok.
8. Select Mediatek preloader usb vcom driver and click next.
==>SP FlashTool
1. Navigate to the SP flash tool folder
2. Run the SP flash tool.exe as admin
3. Click on scatter loading. Navigate to the infinix hot2 rom folder and select the " MT6580_Android_scatter.txt "
Firmware Upgrade >>>Then click on download

==>Make sure your bricked hot2 is connected to your computer at this point while it’s closed
==>Wait until the process is complete 100% and you get something like the image below

After the confirmation, close your flashtool and disconnect your phone then power it on and see the magic.
Good luck guys in unbricking your device.

credits: Yomiprof.com

No comments:

Kindly post a comment

After dropping your comment, keep calm, it may take minutes before it appears after moderation.
Your comment(s) are appreciated.